24V BMS 8 Cell 60A

The battery management system is designed to protect the cells which make up a battery pack and prolong the life of the battery. The BMS will monitor key operational parameters during the charging & discharging process such as voltages (upper & lower limits) and currents (maximum current limits) and will disconnect the battery from the load or charger should any of the set parameters be exceeded.

The BMS will also ensure that individual cells are balanced evenly through bleeding process which is important due to the small differences between cells due to production tolerances. BMS dimensions are 125mm x 95mm x 27mm.

We recommend that all LifePo4 cells are fully charged first with a single cell charger before assembling the battery pack & connecting the BMS.

Important - Due to the fact that we can't control how the BMS is installed this product does NOT come with a warranty. Please check the installation diagram carefully BEFORE attempting to connect the BMS to the battery pack. If you have no electrical experience we would recommend you consider purchasing a complete battery pack.

Battery Type	LifePo4
Overcharge Detection Voltage	3.9V (3.87V-3.93V)
Overcharge Release Voltage	3.8V (3.77V-3.83V)
Balance Activation Voltage	3.60V (3.57V-3.63V)
Balance Release Voltage	3.60V (3.57V-3.63V)
Over-discharge Detection Voltage	2.00V (1.95V-2.05V)
Over-discharge Release Voltage	2.30V (2.25V-2.35V)
Balance Current	75mA
Max. Continuous Discharge Current	33A
Over Current Detection Current	66A
Current Consumption In Normal Operation	10uA
Current Consumption In Over-discharge And Load Not Removed	Less Than 200uA
Current Consumption In Over-discharge Or Load Removed	Less Than 10uA